Sliding sash window2 light

SKU: VS0102

Choose the material for your window or door. For most of our products you can choose between pinewood or aluminium clad pinewood. For alu/clad products the exterior of the product has a 1 mm alu cladding.

Choose the glazing. The options depend on material and model. Read more in the info box (?).

Choose the type of glass which fits the purpose of the window. You can choose between ordinary clear glass and different types of obscure glass.

Building Regulations guidance (Approved Document K): Standard (non-safety) glass may only be used where the bottom edge of the glazing is more than 800 mm above the finished floor level and not within 300 mm of a door opening. Glazing that is below 800 mm; in a door; or within 300 mm of a door edge and below 1500 mm: these must use toughened or laminated safety glass (or be protected by a suitable barrier).

Choose the opening direction. The opening direction is determined by the side on which the hinges are. Doors can open either inside or outside. If you are unsure which you should choose, you can find further information in the box below.

Choose the exterior colour of your product. If you choose "Special RAL colour" please send an email with the desired RAL color. We only produce four-numbered RAL codes (RAL Classic). Please note that we do not offer 'Special RAL colour' for aluminium cladding. For glazes and clear lacquer there can be minor colour differences as the wood is finger jointed.

A "warm edge" spacer improves the insulating qualities of the glass.

Choose your desired handle.

For Tilt & Turn products, click on (i) to see the placement of the handle.

For Tilt & Turn balcony doors, please be aware that these are supplied with a single interior handle as a standard. 
For doors offering a wider range of double-handle options, please visit our Patio and External Doors sections

We offer vents in white or grey. Our trickle & tryk vents allow fresh air into the room even if the window or the door is closed, thus ensuring a better indoor climate.

The vent is placed in the top frame of the window/door
On tilt & turn windows the vent is placed in the top sash and is visible on the outside
Windows with more than one sash, will have 1 vent installed.