What is a lift and slide door?
It is a sliding door where the handle does two jobs. Turn it, and the whole leaf lifts a few millimetres off its seals before it moves. Let it down, and the weight of the door presses the seals shut again.
That is the difference between a lift and slide door and an ordinary slider. An ordinary slider rides on its rollers all the time, so the seals have to be loose enough to let it move. A lift and slide sits down hard when closed and only floats when you are actually opening it.
In practice it means two things. A large leaf moves easily, because it is momentarily off its seals rather than dragging along them. And the closed door seals better than a slider of the same size, because nothing has to stay loose.
Ours are made in pine or alu-clad pine. That is a different class of door from a hinged garden door, and the price reflects a different mechanism rather than a bigger version of the same thing.
Do Sparwindows make bifold doors?
No. We make sliding, French and tilt and turn patio doors, and we would rather tell you now than after you have measured up.
If a bifold is what you are set on, the reason is usually the clear opening: a bifold folds back and leaves most of the gap open. The closest thing we make is a set of French doors, which clears the full opening on a moderate width, or a lift and slide door if the opening is wider than French doors will sensibly span.
Worth knowing before you decide: a bifold has more moving parts, more hinges and more seals than either, and every one of them is a thing to maintain on a door that faces the weather. That is a trade for the wide opening, not a free win.
Thresholds, and why they matter more than you think
Our patio doors come with a low fibreglass threshold as standard. It is the detail people notice every single day and never think about when ordering.
A high threshold is a step, and a step at a door you use in both directions with a tray in your hands is the thing that gets tripped over. A low threshold sits closer to flush with the floor inside and the paving outside.
Two things to plan for while the opening is still a hole in the wall. Get the paving level right relative to the threshold, because you cannot adjust it afterwards. And make sure water runs away from the door rather than towards it, especially on a sliding door, where the rail will collect anything that reaches it.
How much do patio doors cost?
Every door is made to measure, so there is no list price. Yours is calculated from the size you enter, the type, the material, the glazing and the fittings, and the configurator prices it as you build, including VAT.
What moves the price most is the type, not the options. A single hinged garden door and a lift and slide door are not two sizes of the same product: they are different mechanisms, different frames and different glass, and the gap between them is wider than any option you can add to either.
After that, material is the next biggest step, and glazing after that.
When opening a sliding patio door, the door handle will raise the door slightly and the door can slide open to the side on a special rail. In this way the door doesn’t take up any space even when it’s open, unlike a normal patio door that opens either inwards or outwards. You can thus save space both inside and outside and better utilize both your living room and your outdoor patio!
You can easily find a price for your new sliding patio door – in fact, we have some of the lowest prices for sliding timber or alu clad patio doors on the market! Extra accessories include vents and door handles with inside locks for extra security.
As an alternative to our sliding patio doors, you might want to check out our range of french doors or double front doors, which are also great at allowing more daylight into the room.