JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Need help?0178 473 0790
SKU: PP1000
Frame Size: The size in which the window or door is produced. That is, the width x height, from one side of the frame to the other.
Opening Size: The size of the hole in the wall. To arrive at the frame size, 2-3 cm should be subtracted from the opening size, to allow space for the seal for the door or window.
Click here to see how you measure for your windows and doors
Choose the material for your window or door. For most of our products you can choose between pinewood or aluminium clad pinewood. For alu/clad products the exterior of the product has a 1 mm alu cladding.
For tilt & turn elements made of wood & wood/aluminium, triple glazing is possible with a frame depth of 92 mm.
Choose the glazing. The options depend on material and model. Read more in the info box (?). Please note that we temporarily do not offer safety glass.
Choose the type of glass which fits the purpose of the window. You can choose between ordinary clear glass and different types of obscure glass.
Choose the opening direction. The opening direction is determined by the side on which the hinges are. Doors can open either inside or outside. If you are unsure which you should choose, you can find further information in the box below.
Choose the interior colour of your product. If you choose "Special RAL colour" please send an email with the desired RAL color. We only produce four-numbered RAL codes (RAL Classic). For glazes and clear lacquer there can be minor colour differences as the wood is finger jointed.
Choose the exterior colour of your product. If you choose "Special RAL colour" please send an email with the desired RAL color. We only produce four-numbered RAL codes (RAL Classic). Please note that we do not offer 'Special RAL colour' for aluminium cladding. For glazes and clear lacquer there can be minor colour differences as the wood is finger jointed.
A "warm edge" spacer improves the insulating qualities of the glass.
Choose the interior profile for your wooden window. The Softline profile has smooth angles giving your window a modern and stylish look. The Classic profile comes with special frame and casement moulding for a more classical look.
Choose threshold
A groove on the inside frame makes the fitting of casing trims or internal window sills easier. The groove is 10 mm deep and wide.
Aluminium water drip-rail is available in the same colours as the outside of the window, or they can be anodized. The drip-rail leads the water away from the window, to prevent stagnation of water.
We offer vents in white or grey. Our trickle & tryk vents allow fresh air into the room even if the window or the door is closed, thus ensuring a better indoor climate.
The vent is placed in the top frame of the window/doorOn tilt & turn windows the vent is placed in the top sash and is visible on the outsideWindows with more than one sash, will have 1 vent installed.
Choose the right cylinder type for your new door.
The door handle-set has a lever internally or a lever internally and externally. The cylinder locks and handle-roses are factory fitted.
